Why Sealing Your Concrete Surfaces is so Important

November 4, 2020

If you have a patio, driveway, walkway, or pool deck made of stamped concrete or brick pavers, you might be wondering how to protect and preserve their beauty and durability. One of the best ways to do that is by applying a sealer that can enhance the color, prevent stains, and resist weathering.

Sealing stamped concrete and brick pavers is not a difficult task, but it does require some preparation and attention to detail. Here are some steps you should follow to ensure a successful sealing project:

  1. Choose the right sealer for your surface and desired finish. There are different types of sealers available for concrete and masonry surfaces, such as acrylic, polyurethane, epoxy, and penetrating sealers. Each one has its own advantages and disadvantages, depending on the porosity, texture, and color of your surface, as well as the level of gloss and protection you want. For example, acrylic sealers are easy to apply and dry quickly, but they may not last as long as polyurethane sealers, which are more durable and resistant to abrasion and chemicals. Epoxy sealers are very strong and glossy, but they may yellow over time and require professional installation. Penetrating sealers are invisible and do not alter the appearance of your surface, but they only protect against water and not oil or grease stains.
  2. Clean your surface thoroughly before applying the sealer. You want to remove any dirt, dust, oil, grease, mold, mildew, or other contaminants that could interfere with the adhesion and performance of the sealer. You can use a pressure washer, a scrub brush, or a degreaser product to clean your surface, depending on its condition and material. If you have stamped concrete, you may also need to use an etcher product to open up the pores of the concrete and allow the sealer to penetrate better. If you have brick pavers, you may need to re-sand the joints with polymeric sand to prevent weed growth and erosion.
  3. Apply the sealer evenly and according to the manufacturer’s instructions. You can use a pump sprayer, a roller, a brush, or a pad applicator to apply the sealer, depending on its viscosity and your preference. Make sure you follow the directions on the label regarding the coverage rate, drying time, number of coats, and curing time. You should also wear protective gear such as gloves, goggles, and respirator when handling sealers, especially solvent-based ones that emit strong fumes.
  4. Enjoy your sealed surface for years to come. Once your sealer has cured completely, you can enjoy the benefits of having a sealed surface that looks great and lasts longer. Sealing stamped concrete and brick pavers can enhance their color and gloss, prevent fading and discoloration from UV rays, repel water and stains from oil, grease, food, drinks, etc., resist cracking and chipping from freeze-thaw cycles and salt damage, and make cleaning and maintenance easier.

Sealing stamped concrete and brick pavers is a worthwhile investment that can improve the appearance and value of your home or business. By following these steps and choosing the right sealer for your surface and needs, you can ensure a successful sealing project that will protect and preserve your surface for years to come.

Aimply dummy text of the printing and typesetting industry lorem Ipsum has been the industry’s standard dummy text ever area sector since ”

Jessica Mcdade

when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, re

Leave a Reply

Your email address will not be published. Required fields are marked *